- 15
- 12 034 939
Watcheyes
Приєднався 20 гру 2014
Hobby horologist that restore vintage watches, support by hammer the like button ;)
I started to restore watches 2020 so if you have any beginner questions I'm just right at it! Feel free to ask questions in comments or mail me, thank you.
I don't do any private watch projects, only my own projects.
Instagram: Watcheyesone
I started to restore watches 2020 so if you have any beginner questions I'm just right at it! Feel free to ask questions in comments or mail me, thank you.
I don't do any private watch projects, only my own projects.
Instagram: Watcheyesone
Restoration $8500 Rolex Submariner Luxury Watch - Polishing Case Bracelet - Dirty - ASMR
In this video I make a restoration of a $8500 Rolex submariner watch from 2004 with cal 3135. The watch was listed in an auction as defective, serious issues.
Instagram:
watcheyesone
The watch interested me because it looked untouched from the outside and inside so I gave it a shot and bidded on the watch, just one more made a bid…Did I buy a scrap watch or?...
During the restoration the watch movement is restored and the casing is lapped, brushed and polished manually. All gaskets are changed. Pallet fork, escapement wheel, rotor axle needed to be changed. Off camera the automatic module with rotor wasn’t correct after rotor axle change, I needed to change 2 jewels in the automatic module and change one of the jewels height.
After the restoration the watch ran around + 5 seconds per day in real life testing. So I adjusted it a few seconds lower (shown in the video) so now it will probably be around 0 seconds per day, just maybe +1-2 seconds. The watch performance is according to Rolex service specification after 24 h testing.
During the restoration I use my home built DIY KiwiCleaner which is a watch cleaner, please check out the KiwiCleaner, this machine is awesome and just for maybe around 15% of a new Elma cleaner machine (and it's better than the Elma one!).
Link: www.diywatchcleaner.com
My gear and other products, affiliate links*:
Tamron 28-75 f2.8 sony e (Not G2)*: amzn.to/3xEVvRj
Sigma 70mm f/2.8 dg macro sony e*: amzn.to/3O5xgCM
Timegrapher*: amzn.to/3xE2oT4
If you like this video, I'll be very happy if you push the Like button (maybe put a comment?), more videos will come! Take care and thank you for your time!
This is not a tutorial video, I’m just a hobbyist and might do things incorrectly.
-----------
My channel :
www.youtube.com/@Watcheyes
-----------
Music intro and outro:
"Scott Buckley - Snowfall" is under a Creative Commons license Attribution 3.0 Unported (CC BY 3.0) creativecommons.org/licenses/...
Music promoted by BreakingCopyright: • 'Snowfall' by Scott Buckley 🇦🇺 | Pian...
@ScottBuckley
Music mid:
Asher Fulero - Swans In Flight (Official Video)
@AsherFulero
*LINKS USED IN THE DESCRIPTION MAY OR MAY NOT BE AFFILIATE LINKS
As an Amazon Associate, I earn from qualifying purchases.By using the affiliate links I earn a small fee of your purchase with no extra cost. This will support my channel so I can increase the quality of my videos. Thank you for the support!
Instagram:
watcheyesone
The watch interested me because it looked untouched from the outside and inside so I gave it a shot and bidded on the watch, just one more made a bid…Did I buy a scrap watch or?...
During the restoration the watch movement is restored and the casing is lapped, brushed and polished manually. All gaskets are changed. Pallet fork, escapement wheel, rotor axle needed to be changed. Off camera the automatic module with rotor wasn’t correct after rotor axle change, I needed to change 2 jewels in the automatic module and change one of the jewels height.
After the restoration the watch ran around + 5 seconds per day in real life testing. So I adjusted it a few seconds lower (shown in the video) so now it will probably be around 0 seconds per day, just maybe +1-2 seconds. The watch performance is according to Rolex service specification after 24 h testing.
During the restoration I use my home built DIY KiwiCleaner which is a watch cleaner, please check out the KiwiCleaner, this machine is awesome and just for maybe around 15% of a new Elma cleaner machine (and it's better than the Elma one!).
Link: www.diywatchcleaner.com
My gear and other products, affiliate links*:
Tamron 28-75 f2.8 sony e (Not G2)*: amzn.to/3xEVvRj
Sigma 70mm f/2.8 dg macro sony e*: amzn.to/3O5xgCM
Timegrapher*: amzn.to/3xE2oT4
If you like this video, I'll be very happy if you push the Like button (maybe put a comment?), more videos will come! Take care and thank you for your time!
This is not a tutorial video, I’m just a hobbyist and might do things incorrectly.
-----------
My channel :
www.youtube.com/@Watcheyes
-----------
Music intro and outro:
"Scott Buckley - Snowfall" is under a Creative Commons license Attribution 3.0 Unported (CC BY 3.0) creativecommons.org/licenses/...
Music promoted by BreakingCopyright: • 'Snowfall' by Scott Buckley 🇦🇺 | Pian...
@ScottBuckley
Music mid:
Asher Fulero - Swans In Flight (Official Video)
@AsherFulero
*LINKS USED IN THE DESCRIPTION MAY OR MAY NOT BE AFFILIATE LINKS
As an Amazon Associate, I earn from qualifying purchases.By using the affiliate links I earn a small fee of your purchase with no extra cost. This will support my channel so I can increase the quality of my videos. Thank you for the support!
Переглядів: 72 386
Відео
Restoration of The James Bond Watch - Polishing - Live And Let Die - Vintage Tissot - ASMR - 007
Переглядів 306 тис.6 місяців тому
In this video I make a restoration of a James Bond 007 vintage watch which is a Tissot "pr516" automatic watch from around 1970, cal 784-2. The watch was dead when I bought it. I found this watch in an online auction and the guy who owned it lived quite near me. I just pulled the trigger with a quite high bid (in my opinion) and luckily I won the watch. -During the disassembly I think the gear ...
A Century Old Omega Watch Restoration - Rusted - Pre WW2 - Silver Casing - cal 40.6 - ASMR
Переглядів 684 тис.11 місяців тому
In this video I make a restoration of Century old (~100 year) rusted Omega watch. The watch was dead when it came, not running, all of the rusted pivots have jammed it. I saw this vintage Omega watch at an online auction (sold in my town), it didn't look that special, old Omega watch with oxidized silver casing, nothing to brag about. But…when I came home and opened it, it looked almost like ne...
WW2 Rolex Came In PIECES Restoration - Broken Pivot - Speed King - Vintage Watch - Cal. 710 - ASMR
Переглядів 422 тис.Рік тому
In this video I make a restoration of a vintage WW2 Rolex Speed King watch that came in a metal box from someone that I know. The condition of the watch was bad and quickly I realized some parts were broken. Buy a print of this Rolex movement: At 23:36 The print can be bought without a frame (limited quantity). Contact via mail (see contact info) or watcheyesone It's a manual wat...
Restoration The TANK of Watches - Polishing - Vintage Certina DS-2 - ASMR - Cal 25-661
Переглядів 4,9 млнРік тому
In this video I make a restoration of a watch that is The TANK of watches. This vintage watch was produced in ~1970 by Certina and its model name is DS2 (Double Security), the meaning of this is that the watch can be dropped, it can take hits etc, like a true TANK! It's a manual watch (you wind it via the crown). The movement is called cal 25-661. This video is only ASMR. This watch seems to be...
Restoration Forgotten Japanese Vintage Watch - FAIL Cracked Glass - Citizen - ASMR - Cal 5204
Переглядів 624 тис.Рік тому
In this video I make a restoration of a Japanese vintage watch from the brand Citizen that has a hardened mineral glass. This watch was produced in 1968 and it's an automatic watch (it can wind itself when you use it). The movement is called cal 5204. This video is only ASMR. This vintage Citizen watch was very dirty on the outside and inside, it also had some paint on it. So the cleaning had t...
Restoration of an Abandoned 1946 post WW2 vintage watch - Radioactive glow - Manual Work - Certina
Переглядів 4,6 млнРік тому
In this video I make a restoration of a vintage watch from 1946 (post WW2) with Radioactive glow on the hands that's been abandoned for many years. It's a Certina Labora vintage watch, all of the restoration is done by hand manually. It's a mechanical watch with a caliber KF 320. ASMR sound. My gear and other products, affiliate links*: Watch strap in video*: amzn.to/3n9hdYH Certina watches*: a...
Dirty Omega Seamaster Restoration Vintage Watch - ASMR - Manual Work - Cal 491
Переглядів 96 тис.2 роки тому
In this video I make a restoration of a dirty Omega Seamaster vintage watch from 1956, ASMR, all of the restoration is done by hand manually. It's a mechanical automatic Omega watch with a caliber 491 movement. It’s an automatic watch that winds itself by wearing the watch but you can also wind it manually via the crown (you wind it to give it power). This vintage Omega Seamaster watch was very...
Restoration of a Vintage Longines Mechanical Swiss Watch - Manual work - 1970s - ASMR
Переглядів 71 тис.2 роки тому
In this video I make a restoration of a Vintage Longines Swiss Mechanical watch, all done by hand, ASMR and no talking. It's a mechanical watch and it's from the beginning of 1970 with a caliber 428 movement. This watch seems to have been left alone with a missing jewel part and it seems there is no oil in it! Maybe a watchmaker had its reasons to just leave it. In this restoration I do manual ...
Restoration of a WW2 vintage Tissot watch - Manual work - Radioactive ASMR - caliber 27-3
Переглядів 109 тис.2 роки тому
In this video I make a restoration of a WW2 vintage watch from Tissot, its an antimagnetique mechanical watch from the beginning of 1940 with a caliber 27-3 movement. In this restoration I do a manual cleaning and polishing, everything is manually done. This watch movement has 15 jewels and with shock protection. It’s a manual hand wind movement (you wind it via the crown to give it power). Thi...
Restoration of a vintage 50’s Certina mechanical dress watch - ASMR - Manual work - Caliber 321
Переглядів 77 тис.3 роки тому
In this video I make a restoration of a vintage watch which is a Certina from 1956 with a mechanical watch movement, caliber 321 with 15 jewels and shock protection. It’s a manual hand wind movement (you wind it via the crown to give it power). It was a joy to restore this vintage watch, very robust and high quality. The watch works but doesn’t hold the time very good, and I’m having trouble to...
Seiko 7s26 SNK809 Watch disassembly and assembly, only music
Переглядів 78 тис.3 роки тому
This video shows a disassembly and assembly of a Seiko 7s26 SNK809 watch movement. The watch has the model number SNK809 which is a great budget watch and I used this one to learn more about horology as I'm a beginner. This is not an instructional video, only for visuals so that you can see how a Seiko 7s26 movement is built and what type of parts it consists of. Hopefully I can learn you some ...
দেখ যেই খেলুক তার পয়সা দরকার আরো হোক তবে আমায় নিয়ে খেলছো কেনো
👍👍👍👍👍👍👍RESPECT!!!!!!!
Arts 👏👏👏
Mesmerizing from start to finish, wow what a transformation, you have incredible skills.
Magnifique ✨️
Where are you?
What sorcery is this? I'd love to be able to do this but I just don't have the patience. Wonderful to watch a craftsman at work though.
Any chance you could make a video of how to re polish a watch? I see the use of lapping films and other abrasives and would love to know your thought process behind it
bem relaxante
Yok böyle bir şey 'ya mükemmel ustalık 'ya hayran kaldım
難しそう😮
Вы востонавливаете на заказ?
The polishing is not quite perfect
Im sorry but all i see are fake comments.. cleary these people dont know about this. But his work is absolute shit.. i mean look at the lugs... and how he sandpaper the bracelet. Am i the only one??
MOON channel sent me here, nice craftsmanship.
Does anybody know where to find a replacement bezel for this watch?
Hi, please try to contact this guy, he can make a new one for you. Not cheap but one of a kind :) Please say you came from Watcheyes
rcdesign.se/lasergravyr
This was really good to watch but soon I feel asleep 😊😅
Don't you dare polish these cases. Yikes.
Excellent! Thank you.
07:34 😮
J’ai eu exactement la même montre quand j’ai eu 14 ans, Il y a maintenant un bon bout de temps. Je l’ai perdue il y a longtemps.
Respect for your patience, expertise and craftsmanship at all levels from the precision movement to the case. You took time and care to do the job right.
So many little parts
Amazing <3
I love your channel. I have yet to see a tool like the one you have to wind the main spring. Are these types of winders still made today? Can you wind left-coiled main springs with it? Keep up the good work.
Imponerande jobb!
Great video. What would the retail price be on this watch after restoration?
Beautiful work. Are the gears for the automatic movement bakelite? They look plastic. I am surprised to see that in a watch of this vintage but I have no idea what they would have used instead. Steel? Would be heavier. I think aluminum would be too soft and not as robust. They look in pretty good condition after all these years.
Very impresive work ! Just a question : the old broken glass seems to be a mineral one. Did you replace it with a new mineral glass ou an acrilyc cristal ?
Excellent work! Excellent video. What is the lift angle for the Rolex 710 movement?
Would have loved to see it on the wrist! Either way Bravo!
enjoyed your craftsmanship takes alot of skills and experience and patience to complete a job like this A ++ not a watch guy but found a 1920 vogel watch hope I can fix it don't know anything about it but looks like a possible nice gift . runs just needs tweaking like this congrats on the dedication to your craft well deserved AND EASY LIKE!!!❤
This was a very good video! Results were amazing!
Amazing job congratulations !!
This is the watch Christopher Walken stuck up his muffler in Pulp Fiction.
😱
Wonderful. Great job 👏🏻
came here from jre
Hi, who is JRE? :)
@@Watcheyes ua-cam.com/users/shorts46rxEZ8D2gI
@@Watcheyes that
@ThisWillMakeYouGiggle hehe, I don't think he meant me but :)
Fantastic. Loved every moment.
I have the same watch! Mine is running and keeping decent time. One day I’ll attempt a cleaning and service! I hope!
Надо быть трезвенником, руки дрожать не должны!
Еееееебать накрутка, я никогда такого не видел ахахахахах, ПИЗДЕЦ, солнышко ТЫ ЧО АХАХАХАХАХА, тебе лечиться надо.
Stunning restoration! I am wondering if you can share a link to the horotec movement pad you use 😊? Many thanks in advance!
Many thanks :) This is it's ID: MSA09.305
Hi , would you take in for service a Certina DS-2 , 25-652 ?
Great video!
Is this a 21 jewel movement?
To see the fly wheel begin to pulse, irresistible, it's the heartbeat of the watch. Thank you for restoring this old pocket watch back to its former glory.
Amazing work! I have an old Tissot chrono with a Lemania 1277 love this era of Tissot. Do you take any clients ??
First watch I bought with my own (earned!) money was a very similar Tissot... I had it restored a couple of years ago and it keeps better time than my ...Datejust! Great video.
Uno dei più bei restauri con delle riprese fantastiche. 👍
와 재밌다. 정밀기계공학의 아름다움이 느껴지네